| 加入收藏 | 聯系我們
產品分類
當前位置:首頁 - 新聞動態-公司新聞
新聞動態
聯系我們
濟南fun88乐天堂有限公司
地址:濟南市歷城區工業北路161-1號fun88乐天堂
電話:0531-88771456
手機:13698644688
郵箱:371162023@qq.com
傳真:0531-80992585
聯系人:萬經理
歐洲印刷工廠如何對設備進行周期保養
作者:admin 來源:本站 發布時間:2019-5-23 15:02:21 瀏覽次數:22
在印刷業,歐洲的印刷工藝是公認比較出色的,濟南書刊乐天堂国际官网組織了部分人員參觀學習了歐洲的印刷工廠,下面我們就看一下他們在歐洲印刷工廠的所見所聞!
In the printing industry, the printing process in Europe is generally recognized as excellent. Jinan magazine printing organized some people to visit and study the printing factories in Europe. Now let's see what they saw and heard in the printing factories in Europe.
在歐洲進廠時,管理就對員工說“廠房是臉,設備是眼”、“愛護設備就要像愛護自己的眼睛一樣”等,以讓員工在頭腦中首先樹立愛護設備的觀念。在生產過程中,操作人員要時刻關注設備狀態,巡檢供紙部、印刷單元、折頁部分、電柜、水箱和壓縮機、彎板打孔機、其他輔機等是否有異常,一旦發現異常,應及時停機、隨時查找原因、排除故障,將故障扼殺在萌芽狀態。
When entering the factory in Europe, the management will say to the employees, "Factory is face, equipment is eye", "Care for equipment is like care for their own eyes" and so on, in order to let the employees first set up the concept of care for equipment in their minds. In the production process, operators should always pay attention to the status of equipment, patrol the paper supply department, printing unit, folding part, cabinet, water tank and compressor, bending plate puncher, other auxiliary machines and other abnormalities. Once abnormalities are found, they should stop the machine in time, find out the causes at any time, eliminate the failure, and strangle the failure in the budding state.
他們設備日常維護保養工作在以下幾部分嚴格要求:
Their daily maintenance of equipment is strictly required in the following parts:
1:每天早上機長在開機前,要檢查印刷設備的觀察視窗、液晶屏和控制臺是否有異常。
1: Every morning before the computer starts, the captain should check whether there are any abnormalities in the viewing window, LCD screen and console of the printing equipment.
2:在生產過程中,操作人員衣服的袖口、下擺應扣緊,操作人員應穿軟底球鞋,不允許在設備踏板上堆放雜物(如油墨桶、油壺、洗車水和等),在打開擋板機罩時應輕拉輕放,不允許拋扔工具。
2: In the production process, the cuffs and hems of the operator's clothes should be fastened, the operator should wear soft-soled sneakers, and no sundries (such as ink buckets, oil kettles, car wash water, etc.) should be stacked on the equipment pedals. When opening the baffle hood, the operator should be gently pulled and placed, and no tools should be thrown.
3:檢查墨斗上的擋片是否按緊頂死,以避免印刷過程中出現漏墨現象,導致印刷設備的側壁堆積油墨。

3: Check whether the block on the ink bucket is pressed tightly to avoid ink leakage during printing, resulting in ink accumulation on the side wall of the printing equipment.

濟南書刊乐天堂国际官网

4:檢查橡皮滾筒、印版滾筒的清潔狀態。在早上沒有生產之前,廠房往往比較安靜,這時候應該低速運轉設備,檢查是否有異常聲音,仔細聽每個印刷單元的氣路,檢查氣管是否有老化開裂、氣缸漏氣的現象。很多印刷企業都不重視氣路漏氣的問題,他們往往忽略了氣路漏氣不僅會加速氣泵老化,還會造成生產中水路、墨路合壓不到位,最終影響印品質量。
4: Check the cleanliness of rubber drum and plate drum. Before production in the morning, factory buildings are usually quiet. At this time, low-speed running equipment should be checked for abnormal sounds, carefully listen to the air passage of each printing unit, check whether there are aging cracks in the air duct and leakage in the cylinder. Many printing enterprises do not pay attention to the problem of air leakage. They often neglect that air leakage not only accelerates the aging of air pumps, but also causes the inadequate combination of water and ink in production, which ultimately affects the quality of printing.
5:每天嚴格按照操作手冊進行日保養,做到認真細致,對加油點、清潔點做到一絲不茍,不要因為生產而忽略保養或者敷衍了事。
5: Daily maintenance should be carried out in strict accordance with the operation manual every day, so as to be careful and meticulous, and meticulous in filling and cleaning points. Do not neglect maintenance or perfunctory things because of production.
6:每天下班前,要對設備進行全面清潔,清洗墨路和水路的膠輥、印版滾筒、橡皮滾筒,拆除每個印刷單元的墨斗片基,清潔肩鐵、刮墨刀。某印刷企業的墨斗片基用了三天,才拆除清洗,殊不知這樣容易造成墨斗片基磨透,使得油墨流到墨鍵電機上,造成油墨調節失靈,設備難以正常運轉。
6: Every day before leaving work, the equipment should be thoroughly cleaned. The rubber rollers, printing plate drums and rubber drums of ink roads and waterways should be cleaned. The ink bucket base of each printing unit should be removed, and shoulder iron and ink scraper should be cleaned. It took three days for the ink bucket base of a printing enterprise to be removed and cleaned, but it was easy to cause the ink bucket base to wear through, making the ink flow to the ink key motor, causing the ink regulation failure, and making the equipment difficult to operate normally.
感謝您的閱讀與觀看,本文的精彩內容來自:濟南書刊乐天堂国际官网,我們會有更多的精彩內容繼續為您呈現,詳情請點擊:http://fashionalized.com
Thank you for your reading and watching. The wonderful content of this article comes from the printing of Jinan books and magazines. We will continue to present more wonderful contents for you. For more details, please click: http://fashionalized.com.